EMSEAL
Expansion Joints and Pre-Compressed Sealants


Color Selection

Silicone Bellows Color Choices


Examples of COLORSEAL color coordination.


Gray and Rustic Brick


Sandstone


Bronze


Gray and Precast White


Rustic Brick

NY Mets, CitiField. SEISMIC COLORSEAL in all walls.
Dusty Rose and Natural Stone

UPenn Hospital. COLORSEAL by EMSEAL
White


IMPORTANT: All colors depicted here are approximate. 

Actual colors will vary depending on the quality of the monitor on which you are viewing this chart.


 

 

 

 

 

 

 

 

 

 

 

 

 

 

    

When your aesthetic design calls for color coordinating the visible face of the expansion joint with the surrounding substrate surface -- EMSEAL offers the solution. 

A wide range of colors are available for the all of EMSEAL's silicone-coated family of products (COLORSEAL, HORIZONTAL COLORSEAL, SEISMIC COLORSEAL, SEISMIC COLORSEAL-DS) as well as for EMSHIELD WFR2 and EMSHIELD DFR2.

Below are the standard silicone colors available from EMSEAL.


Pecora 890NST, standard, pre-tinted, silicone colors:

(IMPORTANT: When specifying or ordering, please remember to state explicitly both the silicone manufacturer's name and the color, ex. "Pecora 890NST Limestone 039". If the silicone manufacturer is not specified, the standard Dow 790 color will be used on similar names (ex. Limestone, Natural Stone, Sandstone, Gray, Bronze, Black).

EMSEAL Pecora 890NST Silicon colors, Tru White, Precast, Beige, Limestone, Anodized Aluminum, Aluminum Stone, Natural Stone, Sandstone, Charcoal Gray, Classic Bronze, Black, Hartford Green, Red Rock, Pecora 890NST Silicone Colors

Dow 790, standard, pre-tinted, silicone colors:

(IMPORTANT: When specifying or ordering, please remember to state explicitly both the silicone manufacturer's name and the color, ex. "Dow 790 Limestone". Also when choosing the color white, be sure to specify the more common "Precast White" or the less common "White". )

EMSEAl Dow790 Silicone Colors Precast White, Limestaone, White, Natural Stone, Gray, Black, Bronze, Sandstone, Adobe Tan, Dusty Rose, Rustic Brick, Blue Spruce Dow 790 Colors

Pecora TEXTURED pre-tinted, silicone colors:

These have a slightly textured look to more closely approximate the look of grout and have a lower gloss finish.

(IMPORTANT: When specifying or ordering, please remember to state explicitly both the silicone manufacturer's name and the color)


CUSTOM COLOR PROGRAMS--Click Here



When the expansion joint system is dual sided, Seismic Colorseal DS and EMSHIELD WFR2, each side is offered as a separate color choice.  (e.g. WFR2 can be manufactured with a rustic brick face showing toward the building's exterior and a sandstone face showing toward the interior.) The same applies to Universal-90 transitions which can have separate colors for the inside and outside faces.

 

EMSHIELD DFR2
Fire-Rated EMSHIELD DFR2 is manufactured with a coating on both sides. The standard coating on the traffic or floor side is coated with Pecora 301 traffic-grade silicone which is available in Gray.

The traffic or floor side of DFR2 can also be coated with any of the standard Pecora 890NST silicones selected from the above color charts.

The "fire" side is coated with an intumescent coating which is Red.



The intumescent side can also have an optional topcoat of silicone having a color choice of any of the available colors on this page.


IMPORTANT: All colors depicted here are approximate. 

Actual colors will vary depending on the quality of the monitor on which you are viewing this chart.  Contact EMSEAL if actual color samples of the silicones depicted are required.

 



EMSEAL JOINT SYSTEMS LTD. 25 Bridle Lane, Westborough, MA 01581
EMSEAL LLC. 120 Carrier Drive, Toronto, ON M9W 5R1

   

 


1-800-526-8365 -- 508-836-0280 --  techinfo@emseal.com -- Fax: 508-836-0281

Last Modified: April 26, 2015

Copyright © 1998-2015 by EMSEAL Joint Systems, Ltd. All rights reserved.
This document may not be reproduced in whole or in part without permission.